| |
 
Payment Methods Join VIP hpwlab Courses Follow Us Contact Us

 HPWLAB COURSES

HDD Repair & Data Recovery

 Forgot password?
 Register
Search
View: 4627|Reply: 27

[F3] Seagate Diagnostic ERROR CODES

[Copy link]

66

Threads

282

Posts

396

Credits

Full Member

Rank: 3Rank: 3

Credits
396
Post time: 2016-04-25 08:02:11
| Show all posts |Read mode

   ******************************************************************************************
    0x0000 - 0x0FFF: Diagnostic Infrastructure Errors
   ******************************************************************************************
    0x0000: No Error
    0x0001: Unsupported Diagnostic Feature
    0x0002: Online Extrinsic Requests are disabled
    0x0003: Diagnostic Mode Extrinsic Requests are disabled
    0x0004: Diagnostic External Test Service Busy
    0x0005: Invalid Diagnostic External Test Service Request
    0x0006: Extrinsic Diagnostic Aborted
    0x0007: File Creation Error
    0x0008: Memory Allocation Error
    0x0009: Unsupported Diagnostic Parameter Revision
    0x000A: Invalid Diagnostic Parameter
    0x000B: Singular Matrix Error
    0x000C: Congen Read Error (Drive Has Probably Never Been "Congened")
    0x000D: Congen Write Error: Error Occurred Saving Mode Packet Header
    0x000E: File Copy Error
    0x000F: Unable to load Diagnostic Overlay
    0x0010: Congen Write Error: Mode Page Length Does Not Match Specified Length
    0x0011: Congen Write Error: Mode Page Check Member Function Returned Failure
    0x0012: Congen Write Error: Attempt To Change Unchangeable Parameter
    0x0013: Incoming SDBP is too small for DSB
    0x0014: Congen Write Error: Writing Mode Data To Disc Failed
    0x0015: Congen Write Error: Writing Partial Mode Data To Disc Failed
    0x0016: Congen Write Error: Writing Complete Mode Data To Disc Failed
    0x0017: Congen Write Error: Unknown Congen Write Error
    0x0018: Congen Reset Error: Reset Congen Failed
    0x0019: Drive must be power cycled
    0x0020: Invalid ASCII Diag Command
    0x0021: Unable to Load Diag Command Processor Overlay
    0x0022: Data Received from Unsupported Test Service
    0x0023: Unsupported Diag Data Type

   ******************************************************************************************
    0x1000 - 0x1FFF: Memory Errors
   ******************************************************************************************
    0x1000: Invalid Memory Address
    0x1001: Bad Servo RAM Read
    0x1002: Memory Miscompare Error
    0x1003: Buffer Miscompare Error

   ******************************************************************************************
    0x2000 - 0x2FFF: Hardware Errors
   ******************************************************************************************
    0x2000: Unsupported Hardware Feature
    0x2001: Unable to Lock Read Channel
    0x2002: Unable to Unlock Read Channel
    0x2003: Invalid Read Channel Register Address
    0x2004: Read Channel Register Access Error
    0x2005: Unable to Lock Preamp
    0x2006: Unable to Unlock Preamp
    0x2007: Invalid Preamp Register Address
    0x2008: Invalid Read or Write Power ASIC Register Request
    0x2009: Invalid Controller Register Address
    0x200A: Unable to set Preamp Mode
    0x200B: Unable to get Preamp Head Resistance
    0x200C: Controller Register Target Value Out Of Range
    0x200D: Unsupported Controller Register Group

   ******************************************************************************************
    0x3000 - 0x3FFF: Drive Geometry Errors
   ******************************************************************************************
    0x3000: Invalid Target Address
    0x3001: Invalid Read/Write Address
    0x3002: Invalid User LBA
    0x3003: Invalid User Logical Cylinder, Logical Head and Logical Sector
    0x3004: Invalid User Logical Cylinder, Logical Head and Physical Wedge
    0x3005: Invalid User Logical Cylinder
    0x3006: Invalid System LBA
    0x3007: Invalid System Logical Cylinder, Logical Head and Logical Sector
    0x3008: Invalid System Logical Cylinder, Logical Head and Physical Wedge
    0x3009: Invalid System Logical Cylinder
    0x300A: Invalid Physical Cylinder, Logical Head and Physical Sector
    0x300B: Invalid Physical Cylinder, Logical Head and Physical Wedge
    0x300C: Invalid Drive Geometry Information
    0x300D: Invalid NRZ Symbol Extent Address
    0x300E: Invalid PBA
    0x300F: Unsupported Media Partition
    0x3010: No Valid Sectors to Transfer on Target Track
    0x3011: Invalid Head
    0x3012: Invalid Logical Mode Access
    0x3013: Invalid Logical Cylinder entered for Particle Sweep

   ******************************************************************************************
    0x4000 - 0x4FFF: Native Interface Errors
   ******************************************************************************************
    0x4000: Unsupported Native Interface Feature
    0x4001: Invalid Read Cache Segment Information
    0x4002: Invalid Read Cache Search Engine Information
    0x4003: Invalid Read Cache Most/Least Valuable Indices/Linked List Information
    0x4004: Invalid Read Cache Free Segments Information
    0x4005: Invalid Read Cache Miscellaneous Information

   ******************************************************************************************
    0x5000 - 0x5FFF: Read/Write Errors
   ******************************************************************************************
    0x5000: Unsupported Read/Write Feature
    0x5001: Invalid Read/Write Sequence
    0x5002: Read/Write Request Failed
    0x5003: Read Failed
    0x5004: Write Failed
    0x5005: Wedge Read Failed
    0x5006: Wedge Write Failed
    0x5007: Track Erase Failed
    0x5008: Read Miscompare
    0x5009: Pending Block Error
    0x500A: Erase Failed
    0x500B: Diagnostic R/W Buffer too small
    0x500C: Invalid Error Recovery Mode
    0x500D: Format Failed
    0x500E: Process Defect Lists Error
    0x500F: I/F User Table Save Error
    0x5010: R/W Subsysten not Ready to Accept Commands
    0x5011: No Valid Error Recovery Configuration Given Commanded Mode
    0x5012: Drive Free Fall Protection Failed
    0x5013: Particle Sweep Request Failed

   ******************************************************************************************
    0x6000 - 0x6FFF: Servo Errors
   ******************************************************************************************
    0x6000: Unsupported Servo Feature
    0x6001: Servo Failure
    0x6002: Servo Command Error
    0x6003: Read past the end of the Servo Symbol Table
    0x6004: Invalid Servo Symbol Table Entry
    0x6005: Missed Fast I/O Sample
    0x6006: No Fast I/O Response
    0x6007: Spin Up request received when spun up
    0x6008: Spin Up Failed
    0x6009: Spin Down request received when spun down
    0x600A: Spin Down Failed
    0x600B: Seek Failed
    0x600D: Micro Jog Table error

   ******************************************************************************************
    0x7000 - 0x7FFF: Adaptive Parameter Errors
   ******************************************************************************************
    0x7000: Unsupported Adaptive Feature
    0x7001: Unable to open RAP file

    0x7010: Unable to find left side of VGAR vs Track Follow Offset bathtub curve
    0x7011: Unable to find right side of VGAR vs Track Follow Offset bathtub curve

   ******************************************************************************************
    0x8000 - 0x8FFF: Logging Errors
   ******************************************************************************************
    0x8000: Invalid Log File
    0x8001: Log Full
    0x8002: Log File Read or Write Failed

   ******************************************************************************************
    0x9000 - 0x9FFF: Defect Management Errors
   ******************************************************************************************
    0x9000: Primary Defect List System Disc File Write Error
    0x9001: TA PSFT Defect List System Disc File Write Error
    0x9002: Could not open Format Client Defect List

   ******************************************************************************************
    0xA000 - 0xAFFF: Shared Test API Errors
   ******************************************************************************************
    0xA000: Fast IO Initialization Error
    0xA001: Baseline PES collection Error
    0xA002: Delta PES collection Error



Reply

Use magic Report

6

Threads

325

Posts

970

Credits

Senior Member

Rank: 4

Credits
970
Post time: 2016-05-17 08:23:22
| Show all posts
Thank you for sharing.
Reply Support Not support

Use magic Report

41

Threads

267

Posts

2417

Credits

Gold Member

Rank: 6Rank: 6

Credits
2417
Post time: 2016-06-17 07:10:19
| Show all posts
Thank you...
Reply

Use magic Report

0

Threads

53

Posts

721

Credits

Senior Member

Rank: 4

Credits
721
Post time: 2016-07-05 15:33:25
| Show all posts
very interesting
Reply Support Not support

Use magic Report

15

Threads

404

Posts

1054

Credits

Gold Member

Rank: 6Rank: 6

Credits
1054
Post time: 2016-08-09 03:39:28
| Show all posts
thanks
Reply

Use magic Report

42

Threads

416

Posts

1160

Credits

Gold Member

Rank: 6Rank: 6

Credits
1160
Post time: 2016-08-09 06:21:07
| Show all posts
thanks
Reply

Use magic Report

1

Threads

42

Posts

165

Credits

Member

Rank: 2

Credits
165
Post time: 2016-08-09 17:18:16
| Show all posts
thanks
Reply

Use magic Report

7

Threads

105

Posts

2243

Credits

Gold Member

Rank: 6Rank: 6

Credits
2243
Post time: 2016-11-13 02:47:24
| Show all posts
Thanks
Reply

Use magic Report

4

Threads

25

Posts

126

Credits

Member

Rank: 2

Credits
126
Post time: 2016-11-13 10:01:14
| Show all posts
thank you
Reply

Use magic Report

0

Threads

15

Posts

90

Credits

Member

Rank: 2

Credits
90
Post time: 2016-11-30 01:05:00
| Show all posts
thanks for sharing
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Archive|Mobile|Dark room|hpwlab

2020-01-25 19:02 GMT+8 , Processed in 0.162215 sec., 18 queries .

Powered by Discuz! X3.2, Licensed

Release 20141225, © 2001-2020 Comsenz Inc.

MultiLingual version, Rev. 441, © 2009-2020 netdepviet.org

Quick Reply To Top Return to the list