برنامج New Tool For repair F3 Hdd English Version

ENG_OSAMA · تم نشره منذ 2015-06-28 04:08:03

ملاحظة: الكاتب محظور أو محذوف.

قائمة الأعضاء الذين شكرو العضو

MMZHR(2017-10-02 06:55) qopuq(2017-08-21 02:58) seagatetech(2016-10-25 09:03) taha1tohid1(2016-01-23 06:36) DECEBAL(2015-10-22 17:25) Carlos1973(2015-10-18 08:28) Misiu3000(2015-08-17 19:37)

ttc2015 · تم نشره منذ 2015-06-30 20:35:01

you share for me this tools , thanks.

tomcat-f14 · تم نشره منذ 2015-06-29 15:55:50

very thanks

Bluetech · تم نشره منذ 2015-06-29 05:42:42

thnk u so much

ttc2015 · تم نشره منذ 2015-06-28 22:09:42

why , i no download , you share for me to use demo, thanks

GALAXY · تم نشره منذ 2015-06-28 12:39:18

i cann not download this tool

ttc2015 · تم نشره منذ 2015-06-28 12:20:46

this tools no repair f3 new 7200.12 sata

ttc2015 · تم نشره منذ 2015-06-28 22:44:10

Please , help me, repair this errors, thanks

Failed to load overlay 00000004

admin · تم نشره منذ 2015-06-28 18:27:52

ttc2015 رد في 2015-06-28 12:20
this tools no repair f3 new 7200.12 sata

are you sure

ttc2015 · تم نشره منذ 2015-06-28 22:13:24

i use cmd B0 then occours error  :

Batch File 21 FAILED
()
Predefined Batch File Sequence FAILED

but

CAP:

  (P1=00) Validation Key: FFFFFFFF
  (P1=01) HDA Serial Number: 9VY5RP7S
  (P1=02) PCBA Serial Number: 0000C0367S2P
  (P1=03) PCBA Part Number: Invalid
  (P1=04) Head Count: 01
  (P1=05) Node Name Validation Key: 01
  (P1=06) Node Name: 50 00 C5 00 1F F1 A6 AF
  (P1=07) Product Family ID: 3F
  (P1=08) Product Family ID: 06
  (P1=09) PCBA Build Code: Invalid
  (P1=0A) ASIC Info:
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF
  (P1=0B) Firmware Key: FF FF FF FF FF FF FF FF FF FF FF FF FF FF
  (P1=0C) Firmware Key Checksum: FFFF
  (P1=0D) Date of Manufacture: 03182010
  (P1=0E) Destroked Buf Size Index: 00
  (P1=0F) Final Mfg Op: Invalid
  (P1=10) Final Mfg Erc: Undefined
  (P1=11) System Area Prep State: FE
  (P1=12) SPT Auto Run Delay: 00
  (P1=13) Reserved:
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
         FF FF FF FF FF FF
  (P1=14) Checksum: FFFF
  (P1=15) External Model Number: ST3160318AS
  (P1=16) Internal Model Number: ST3160318AS
  (P1=17) IDEMA Capacity: 12A19EB0
DiagError 00007003

this errors can error FW ?  i use cmd /2I,FF , i no see CAP in table , you help me to repair this errors, thanks


طرق الدفع	منتجات الشركة	حجز الكورسات	Dealer Area	الحصول على VIP

		تسجيل دخول تلقائي	نسيت كلمة المرور
كلمة المرور			التسجيل

[مشاركة] برنامج New Tool For repair F3 Hdd English Version

قائمة الأعضاء الذين شكرو العضو